Rust converter what is

The oil-based formula uses rust prevention additives to prevent additional rust formation and to keep rust from spreading to surrounding metal surfaces. Dry to the touch in 20 to 40 minutes, the small quantity in each It even prevents rust from spreading and protects the coated surface from further rust formation.

This rust treatment comes in an easy-to-use spray can, and it dries within minutes. Permatex also offers a liquid solution for those who prefer a paintbrush or roller. One downside is that this product costs almost double that of comparable quantities of other converters. One gallon can cover up to square feet and dry to the touch in only 20 minutes. It can be applied with a brush, roller, or spray bottle. This product works best on thin layers of rust, may require more surface prep than some other products, and two coats might be required to be fully effective.

Rust Kutter uses a unique chemical conversion process that transforms rust into a paintable phosphate coating. It comes ready to use with an attached sprayer head, but the head detaches to allow coverage via a brush or roller. One gallon covers up to square feet of rusted metal. Porous, textured and irregular surfaces will require a heavier application rate.

Can I apply a primer coat over Rust Converter? Yes, an oil based primer may be applied over Rust Converter , but is not required. Is it necessary to paint over Rust Converter? It will definitely extend the protective qualities of the surface from adverse weather including rain, salt mist and direct sunlight. What type of paint should I use to cover the Rust Converter?

Use oil based or epoxy paints to paint over Rust Converter , do not use Latex or water based paints. How many coats of Rust Converter should I apply? Many applications require one coat. We suggest applying a second coat to assure complete coverage and conversion.

How long does it take Rust Converter to dry? Rust Converter will dry to the touch in approximately 20 minutes. Application of a second coating will ensure proper rust conversion. If possible, wait 24 hours before applying a second coat of Rust Converter to allow for curing. If applying an oil-based top coat, wait 48 hours after the last coat to ensure it has proper time to cure. How should I clean my application equipment after applying Rust Converter?

Simply use soap and water for clean-up! Can I use Rust Converter on my grill, cast iron wood stove, engine, boiler, or any other heated surface? No, Rust Converter is not heat resistant and should not be used on any surface that will be heated. Can Rust Converter be used on galvanized steel? Rust converter contains tannic acid and complex organic polymers. Tannic acid is a complex organic acid found in plants. It reacts with rust to form iron tannate or ferric tannate a dark-coloured stable material.

This creates a uniform finish that enhances the appearance of an object or surface. The organic polymers in the rust converter solution ensure that the final surface is a stable and protective polymeric coating that requires no further treatment.

Rust Converter is suitable for use on an rusty iron or steel objects. This includes wrought, cast iron such as railings, vehicles, trailers, farming equiment, gates and gardening equipment. Rust converter is not suitable for treating aluminum, copper, stainless steel or galvanized metal.

As the solution is water based the drying time for the rust converter can vary depending on several factors including the temperature in the room and any humidity in the air. Although generally the drying time is around 20 minutes at room temperature this time could be reflective dependent on the weather.

Opting to carry out the task on a warm day will reduce the drying time for the rust converter. Before applying your rust converter on to the designated surface it is advisable to clean up the surface first. Using a stiff bristled brush or sandpaper scrape away any large pieces of loose rust. What objects can Rust Converter be used on?

Can Rust Converter be applied to a wood stove? It is not considered to be heat resistant. Can Rust Converter be applied to a non-rusty surface? Can Rust Converter be used on Galvanized Steel? How should you store Rust Converter? What is the optimal temperature at which Rust Converter should be applied?

What preparation is needed before Rust Converter is applied? What personal protective equipment is recommended when applying? Is Rust Converter U. Can a sprayer be used to apply Rust Converter?

Are the vapors from Rust Converter harmful? Is Rust Converter harmful if swallowed? Rust Converter contains tannic acid. If swallowed, obtain medical attention. How long does it take for Rust Converter to dry? Why is a high-quality oil-based paint recommended for a top sealant? An oil-based paint is considered to be resistant to weather and rain. How many coats of Rust Converter should be applied on the rusty surface?

Paint-On Rust Converter requires two coats. Sprayable Rust Converter requires three coats for optimum coverage. Aerosol Spray-On Rust Converter requires four coats for optimum coverage.

Do you have to paint over Rust Converter?